electronic_cigarette
https://ift.tt/eA8V8J
My opinion of the Geek Vape Zeus Nano Tank https://ift.tt/36xy27a

(disclaimer: all photos and videos are mine & the product was sent to me from Geek Vape)

General photo of the Zeus Nano tank!

What's Inside

Photos from all sides

Some more

Fill port

Video – Airflow

Video – General video

Video – Changing the coil

The Zeus Nano tank is a top airflow sub ohm tank, made from Stainless Steel, the bottom is 20mm in diameter, the tank is 22mm and 43.3mm in height. Has a juice capacity of 2ml and 3.5ml with the bubble tank. It has a 510 drip tip and is compatible with the GV Boost coils.

Inside the packaging you get the Zeus Nano, two coils, a second drip tip, a bubble tank, orings and a tool to remove the coil. The coil installed is a 0.4Ω Kanthal coil and it's recommended to vape between 25-33W. The second coil is a 0.6Ω Kanthal coil and it's recommended to vape between 15-25W.

It's been a while since I last had an atty that small in diameter and especially a little atty that is sub ohm and not MTL and I wanna start from that. You can close entirely the airflow control and it still isn't MTL, a tight DL yes but no MTL. I hope they are gonna release some MTL coils, around 1.0Ω and I'm sure it will be a big hit.

But, best thing about it? If you don't like pod systems or AIO devices but you're a fan of the BOOST Coils now you can enjoy them with the Zeus Nano tank.

I don't get why there are two exactly the same drip tips inside the packaging, there should have been an option for a bigger one. Maybe it was a mistake, I'm not sure.

As in all previous editions of the Zeus, the top cap here is very easy to open with just one hand. If you have in your collection older versions of the Zeus and especially the Zeus X, you might remember that when you were taking off the top cap, the airflow control ring was coming out together. I'm pleased to say that this is not happening here and it stays in it's position thankfully.

The two filling ports for the e-juice should have been a bit bigger, now I have to be a bit careful because if I'm in a hurry and want to fill it fast there will be juice everywhere. Not exactly a con but you get the idea.

You can change the coil pretty easily and I want to recommend here that if you can't take the coil out with your hand and you don't want to use the tool every time, just drop a couple of small drops on the two oring on the coil and voila! The coil will go in and out without any problems.

Also, you should be careful if you're not using the bubble tank but the straight tank instead, there's not much space between the glass and the bell inside so you can't vape until the tank is almost empty because the juice will stuck in the sides and you'll get a dry hit for sure(personal experience haha). Better use the bubble tank or fill it with juice when it's 1/3 full only.

I like to vape with it with the airflow halfway closed. The flavor is the best there, good cloud production and it doesn't get warm very fast. Of course there is no leaking and the coils are amazing here too.

If you read it all, thank you very much and if not that's OK too! 🙂

(disclaimer: all photos and videos are mine & the product was sent to me from Geek Vape)General photo of the Zeus Nano tank!What’s InsidePhotos from all sidesSome moreFill portVideo – AirflowVideo – General videoVideo – Changing the coilThe Zeus Nano tank is a top airflow sub ohm tank, made from Stainless Steel, the bottom is 20mm in diameter, the tank is 22mm and 43.3mm in height. Has a juice capacity of 2ml and 3.5ml with the bubble tank. It has a 510 drip tip and is compatible with the GV Boost coils.Inside the packaging you get the Zeus Nano, two coils, a second drip tip, a bubble tank, orings and a tool to remove the coil. The coil installed is a 0.4Ω Kanthal coil and it’s recommended to vape between 25-33W. The second coil is a 0.6Ω Kanthal coil and it’s recommended to vape between 15-25W.It’s been a while since I last had an atty that small in diameter and especially a little atty that is sub ohm and not MTL and I wanna start from that. You can close entirely the airflow control and it still isn’t MTL, a tight DL yes but no MTL. I hope they are gonna release some MTL coils, around 1.0Ω and I’m sure it will be a big hit.But, best thing about it? If you don’t like pod systems or AIO devices but you’re a fan of the BOOST Coils now you can enjoy them with the Zeus Nano tank.I don’t get why there are two exactly the same drip tips inside the packaging, there should have been an option for a bigger one. Maybe it was a mistake, I’m not sure.As in all previous editions of the Zeus, the top cap here is very easy to open with just one hand. If you have in your collection older versions of the Zeus and especially the Zeus X, you might remember that when you were taking off the top cap, the airflow control ring was coming out together. I’m pleased to say that this is not happening here and it stays in it’s position thankfully.The two filling ports for the e-juice should have been a bit bigger, now I have to be a bit careful because if I’m in a hurry and want to fill it fast there will be juice everywhere. Not exactly a con but you get the idea.You can change the coil pretty easily and I want to recommend here that if you can’t take the coil out with your hand and you don’t want to use the tool every time, just drop a couple of small drops on the two oring on the coil and voila! The coil will go in and out without any problems.Also, you should be careful if you’re not using the bubble tank but the straight tank instead, there’s not much space between the glass and the bell inside so you can’t vape until the tank is almost empty because the juice will stuck in the sides and you’ll get a dry hit for sure(personal experience haha). Better use the bubble tank or fill it with juice when it’s 1/3 full only.I like to vape with it with the airflow halfway closed. The flavor is the best there, good cloud production and it doesn’t get warm very fast. Of course there is no leaking and the coils are amazing here too.If you read it all, thank you very much and if not that’s OK too! 🙂

Submitted November 13, 2020 at 12:25AM by kokobloko
via reddit https://ift.tt/35qYZtV}

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s