Time for another Rapture Review! Today we’re looking at the Smok Devilkin Kit! Interesting shape, but extremely ergonomic. via /r/electronic_cigarette

electronic_cigarette
https://ift.tt/eA8V8J
Time for another Rapture Review! Today we’re looking at the Smok Devilkin Kit! Interesting shape, but extremely ergonomic. https://ift.tt/2LfzQGh

Disclaimer: this product was sent to me for the purposes of this review by Smok. This does not influence my opinions of this device.

Smok really needs no introduction on this sub. Love them or hate them, it’s unavoidable to see their devices everywhere because for better or worse, they’re relatively cheap and popular amongst non-hobbyist vapers. Today we’re looking at one of their newest kits, The Devilkin Kit.

Package contents

Spec Sheets

MOD

Tank (TPD version)

The first thing that’ll stand out about this mod is its shape. It’s not your standard rounded rectangle/rectangle dual battery mod, it’s all curved, similar in shape to the IPV Eclipse. Unlike the Eclipse, the Devilkin has a concave curve on the opposite side of the fire bar. This curve makes the mod fit in your hand similar to an xbox controller. Depending on how you hold the device, the curve fits into the palm, lets you rest your middle finger in the curve, or your thumb in the curve along the side of the mod. It’s an interesting design aesthetically, but it’s incredibly ergonomic and just sits naturally in your hand.

The Operating system is similar to ever other smok device, at this point we all know how they work. Interestingly this mod does not do the hold to shut off while locked. You have to do 5 clicks and then 3 clicks to enter the menu system to select the option to turn the mod off. The biggest issue with the firmware of this device (v1.0.2) is that it doesn’t always register the 5 clicks to turn the device on. Sometimes it does, and sometimes it takes multiple attempts to turn it on. Hopefully this will be addressed in a firmware update.

The paint seems to be up to spec with all their new devices. I do have one scratch from throwing the device in my bag with my other devices I use at work (I work in a vape shop) but other than that one scratch I have no other blemishes on the mod. The mod also comes in 12 different colors now, so you have options.

The chip seems to have a similar issue with boosting voltage like I had with the H-Priv 2, which sucks. If the H-Priv 2 charts are anything to go off of from DJLSB, it seems that you’re only going to be able to get the full 225w at a resistance around a .15 This mod will be great for those vaping around that 130w mark or below, but if you try to hit that 225 with a series build you’re only going to get 6.5v out of the mod even though they advertise a 9v cutoff.

The kit comes with the TFV12 Prince tank, which isn’t a bad tank. Coil life is to be expected, I got about 6 days with a super sweet fruit juice with the Q4 coils, and I’m currently on day 4 with the T10 coils (this review was typed up on saturday May 19th, now on day 6 with the T10 coils and they aren't showing any signs of gunk). I think the coils being run at a lower power compared to the original TFV12 and the TFV8 contributes to longer coil life. Flavor is passable, it’s not as intense as a rebuildable atomizer, but it’s good enough to use throughout the day. If I can get my hands on some mesh coils, I’m sure that the flavor would be that much better.

Pros and Cons

Pros

  • Extremely ergonomic
  • Good paint quality
  • East to navigate menu system
  • Battery door is a clip lock and not a slide lock in like the alien
  • Quick scrolling wattage adjustment
  • No battery or button rattle

Cons

  • Only fits up to 26mm
  • Same chip problem as H-Priv 2
  • Missing hold to turn off while locked function
  • Doesn’t always turn on with 5 clicks
  • No tank bands for bubble glass

TL;DR and Rating

This time I’m giving this mod a rating.

I rate on a 10 point scale: 10- perfect IMO, would by multiple. 9- almost perfect, would buy another. 8- Great, would buy replacement if I lost it. 7- Good, would maybe buy a replacement if lost. 6- okay, probably wouldn't be upset if lost. 5 through 0 failure of varying degrees, would not recommend. (4 or 5 maybe if free)

I give this mod a 6.75 and the tank a 6.5, as a kit I would rate it a 6.75

It’s not like it’s a bad device. Ergonomically it’s great, functionality is where it falters. The fact that it doesn’t turn on when it’s supposed too and the fact that it doesn’t boost its voltage like it’s supposed too knocks the rating down a lot. The tank is nothing spectacular, but it’s passible. Together it makes a decent starter kit for those looking to get into sub ohm vaping, not necessarily for the hobbyist vaper.

if you want to pick this kit up, it’s available online from 45-70 dollars

Official product page

Disclaimer: this product was sent to me for the purposes of this review by Smok. This does not influence my opinions of this device.Smok really needs no introduction on this sub. Love them or hate them, it’s unavoidable to see their devices everywhere because for better or worse, they’re relatively cheap and popular amongst non-hobbyist vapers. Today we’re looking at one of their newest kits, The Devilkin Kit.Package contentsSpec SheetsMODTank (TPD version)The first thing that’ll stand out about this mod is its shape. It’s not your standard rounded rectangle/rectangle dual battery mod, it’s all curved, similar in shape to the IPV Eclipse. Unlike the Eclipse, the Devilkin has a concave curve on the opposite side of the fire bar. This curve makes the mod fit in your hand similar to an xbox controller. Depending on how you hold the device, the curve fits into the palm, lets you rest your middle finger in the curve, or your thumb in the curve along the side of the mod. It’s an interesting design aesthetically, but it’s incredibly ergonomic and just sits naturally in your hand.The Operating system is similar to ever other smok device, at this point we all know how they work. Interestingly this mod does not do the hold to shut off while locked. You have to do 5 clicks and then 3 clicks to enter the menu system to select the option to turn the mod off. The biggest issue with the firmware of this device (v1.0.2) is that it doesn’t always register the 5 clicks to turn the device on. Sometimes it does, and sometimes it takes multiple attempts to turn it on. Hopefully this will be addressed in a firmware update.The paint seems to be up to spec with all their new devices. I do have one scratch from throwing the device in my bag with my other devices I use at work (I work in a vape shop) but other than that one scratch I have no other blemishes on the mod. The mod also comes in 12 different colors now, so you have options.The chip seems to have a similar issue with boosting voltage like I had with the H-Priv 2, which sucks. If the H-Priv 2 charts are anything to go off of from DJLSB, it seems that you’re only going to be able to get the full 225w at a resistance around a .15 This mod will be great for those vaping around that 130w mark or below, but if you try to hit that 225 with a series build you’re only going to get 6.5v out of the mod even though they advertise a 9v cutoff.The kit comes with the TFV12 Prince tank, which isn’t a bad tank. Coil life is to be expected, I got about 6 days with a super sweet fruit juice with the Q4 coils, and I’m currently on day 4 with the T10 coils (this review was typed up on saturday May 19th, now on day 6 with the T10 coils and they aren’t showing any signs of gunk). I think the coils being run at a lower power compared to the original TFV12 and the TFV8 contributes to longer coil life. Flavor is passable, it’s not as intense as a rebuildable atomizer, but it’s good enough to use throughout the day. If I can get my hands on some mesh coils, I’m sure that the flavor would be that much better.Pros and ConsProsExtremely ergonomicGood paint qualityEast to navigate menu systemBattery door is a clip lock and not a slide lock in like the alienQuick scrolling wattage adjustmentNo battery or button rattleConsOnly fits up to 26mmSame chip problem as H-Priv 2Missing hold to turn off while locked functionDoesn’t always turn on with 5 clicksNo tank bands for bubble glassTL;DR and RatingThis time I’m giving this mod a rating.I rate on a 10 point scale: 10- perfect IMO, would by multiple. 9- almost perfect, would buy another. 8- Great, would buy replacement if I lost it. 7- Good, would maybe buy a replacement if lost. 6- okay, probably wouldn’t be upset if lost. 5 through 0 failure of varying degrees, would not recommend. (4 or 5 maybe if free)I give this mod a 6.75 and the tank a 6.5, as a kit I would rate it a 6.75It’s not like it’s a bad device. Ergonomically it’s great, functionality is where it falters. The fact that it doesn’t turn on when it’s supposed too and the fact that it doesn’t boost its voltage like it’s supposed too knocks the rating down a lot. The tank is nothing spectacular, but it’s passible. Together it makes a decent starter kit for those looking to get into sub ohm vaping, not necessarily for the hobbyist vaper.if you want to pick this kit up, it’s available online from 45-70 dollarsOfficial product page

Submitted May 21, 2018 at 08:03PM by Chasing_Rapture
via reddit https://ift.tt/2Li1oLm}

Ostrich | Filmsupply Presents by Filmsupply

Ostrich | Filmsupply Presents by Filmsupply

https://ift.tt/2KtluRr

Set late one evening in a Westminster bar, journalist Will Hewitt meets no-nonsense Deputy Finance Minister Pippa Thomas for what begins as a simple interview. Early exchanges, however, spark fireworks as both begin to reveal their dangerous hidden intentions — proving that once the truth is uncovered, there’s no going back.

Go behind-the-scenes on the blog: https://flmsp.ly/strc

Learn more about the film: https://flmsp.ly/fsrts

License footage: https://flmsp.ly/lcnst

Cast:

Will Hewitt
JAMES FLOYD

Pippa Thomas
FIONA GILLIES

Michael
CHRISTOPHER ETTRIDGE

Writer / Director: Patrick Walsh
Director of Photography: Phil Arntz
Producers: James Northcote, Elisabeth Hopper, Hatty Hodgson
Executive Producers: Ryan Avery, Ben Mitchell
Associate Producers: Harriet Creelman, Louise Walker, Yvonne Hopper
Music: The Clear Night Sky
Production Designer: Aimee Meek
Costume Designer: Jovana Gospavic
Make-up Designer: Lily Gregory
Casting: Vicki Thomson
First Assistant Director: Pratyusha Gupta
Second Assistant Director: Harriet Creelman
Production Manager: Praghav Pasricha
Gaffer: Chris Georgas
Lighting Technician: George Stock
B-Cam Operator: Lorenzo Levrini
1st Assistant Camera (A-CAM): Michael Hannided
1st Assistant Camera (B-CAM): Jack Peagam
Loader: Becky Lee
Camera Trainee: Deano Southan
Movi Operator: James Davis
Script Supervisor: Connie Fyans
Costume Supervisor: Harumi Hirata
Production Sound Mixer: Jordan Tewkesbury
Boom Operator: James Spurrier
DIT: Dave Robinson
Production Assistants: Henry Walker, Charlie Dalton
Driver: Andy McCormick
Colourist: Matt Watson
Sound Designers: Will Thomas, Dan Bodsworth
Editorial and Online: The Quarry
Stills Photographers: Niklas Mulzer, Dave Davis
Behind the Scenes: Adam Plowden
Second Unit Camera Assistant: Julian Wakefield

Uploaded 2018-05-16T14:23:30.000Z